India Industrial Automation | PLC | SCADA | HMI info@swarupsoftech.com
Weather Monitoring SolutionsIndustrial Sensors • Data Logger • SCADA • IoT Cloud
Industrial weather sensor product lineup for automatic weather station and SCADA integration

weather sensors

Weather Sensors for Automatic Stations, SCADA & Data Loggers

Weather sensors — Select and integrate industrial weather sensors for automatic weather stations, solar plants, factories, agriculture, research and remote monitoring. Swarup Softech supports sensor interface engineering, mounting, data acquisition, scaling, diagnostics and SCADA/cloud connectivity.

Industrial EngineeringSCADA & Cloud ReadyIndia-Wide Support
WEATHEREDGE LIVE SYSTEM HEALTHY
0–10 VAnalog
4–20 mACurrent
RS485Serial
PulseRain
ModbusProtocol
READYIntegration
Engineered PackageField instruments to reports
Open CommunicationModbus, Ethernet, MQTT and API
Industrial DataSCADA, SQL, CSV and PDF
Serviceable DesignDiagnostics and health monitoring

System capabilities

Weather Sensors engineered for reliable operation

Select and integrate industrial weather sensors for automatic weather stations, solar plants, factories, agriculture, research and remote monitoring. Swarup Softech supports sensor interface engineering, mounting, data acquisition, scaling, diagnostics and SCADA/cloud connectivity.

Temperature & Humidity

Shielded atmospheric sensing for continuous monitoring.

Wind Sensors

Cup/vane or ultrasonic measurement for speed and direction.

Rain Gauges

Tipping-bucket sensors for event and accumulation records.

Pyranometers

Solar irradiance inputs for weather and PV applications.

Pressure Sensors

Barometric pressure measurement and historical trends.

Integrated Sensors

Compact multi-parameter instruments for space-limited sites.

weather sensors sensors data logger SCADA cloud monitoring system

weather sensors architecture

Weather Sensors sensor-to-cloud system

The weather sensors combines field sensors, industrial data acquisition, local storage, open communication, SCADA visualization, alarms and engineering reports. Hardware and software are configured for the approved site requirement.

Discuss Your Application
Industrial Sensor Portfolio

10 Weather Sensors with Practical Integration Specifications

Select field instruments for temperature, humidity, wind, rainfall, pressure, solar irradiance, agriculture and air quality. Every sensor can be engineered around the required signal, protocol, enclosure and SCADA architecture.

Temperature & Relative Humidity Sensor for industrial weather monitoring01

Temperature & Relative Humidity Sensor

Air temperature and humidity sensing for industrial weather stations.

-40 to +85°C
0–100% RH
±0.2°C / ±2% RH
RS485 Modbus or 4–20 mA
IP65 shield
Cup Anemometer — Wind Speed for industrial weather monitoring02

Cup Anemometer — Wind Speed

Rugged rotating-cup wind measurement for field stations and plant sites.

0–60 m/s
±0.3 m/s or ±3%
Pulse / 4–20 mA / RS485
Stainless construction
IP65
Wind Vane — Direction for industrial weather monitoring03

Wind Vane — Direction

Low-friction direction sensing for meteorology and industrial safety.

0–360°
±3° typical
1° resolution
RS485 or 4–20 mA
IP65
Tipping-Bucket Rain Gauge for industrial weather monitoring04

Tipping-Bucket Rain Gauge

Continuous event rainfall measurement with timestamped pulse capture.

0.2 mm per tip
200 cm² collector
Up to 8 mm/min
Pulse or RS485
UV / stainless construction
Barometric Pressure Sensor for industrial weather monitoring05

Barometric Pressure Sensor

Stable atmospheric pressure measurement for weather and environmental analytics.

300–1100 hPa
±0.3 hPa typical
0.1 hPa resolution
RS485 / SDI-12
IP65 enclosure
Pyranometer — Solar Irradiance for industrial weather monitoring06

Pyranometer — Solar Irradiance

Global horizontal irradiance measurement for solar plant performance monitoring.

0–2000 W/m²
Response under 15 s
Analog or RS485
Levelled mounting
Project calibration configurable
Ultrasonic Wind Sensor for industrial weather monitoring07

Ultrasonic Wind Sensor

No-moving-parts wind speed and direction for low-maintenance sites.

0–60 m/s
Direction 0–359°
No moving parts
RS485 Modbus
IP66
Leaf Wetness Sensor for industrial weather monitoring08

Leaf Wetness Sensor

Surface moisture sensing for agrometeorology and disease-risk models.

0–100% wetness
Fast response grid
Analog or SDI-12
Low-power operation
IP67
Soil Moisture & Temperature Probe for industrial weather monitoring09

Soil Moisture & Temperature Probe

Combined root-zone water-content and temperature measurement.

VWC 0–100%
-40 to +80°C
±3% VWC / ±0.5°C
RS485 / SDI-12
IP68 probe
PM2.5 / PM10 Air Quality Sensor for industrial weather monitoring10

PM2.5 / PM10 Air Quality Sensor

Weatherproof particulate monitoring for environmental and industrial sites.

0–1000 µg/m³
PM1 / PM2.5 / PM10
RS485 Modbus
Aspirated enclosure
IP65

Specification note: Values shown are typical configurable ranges for system planning. Final accuracy, interface, enclosure and calibration are confirmed against the approved project datasheet.

Parameters and signals

Configurable measurement and diagnostic data

Final range, accuracy, resolution, interface and mounting are selected against the approved project specification.

Temperature sensorConfigured for the selected instrument and application.
Humidity sensorConfigured for the selected instrument and application.
AnemometerConfigured for the selected instrument and application.
Wind vaneConfigured for the selected instrument and application.
Ultrasonic windConfigured for the selected instrument and application.
Rain gaugeConfigured for the selected instrument and application.
PyranometerConfigured for the selected instrument and application.
BarometerConfigured for the selected instrument and application.
Soil moistureConfigured for the selected instrument and application.
Soil temperatureConfigured for the selected instrument and application.
Water levelConfigured for the selected instrument and application.
Air quality sensorConfigured for the selected instrument and application.

Open architecture

Field sensor to decision-ready data

A maintainable architecture connecting instruments with industrial and enterprise systems.

Field InstrumentsMeasured values and status
Logger / RTUAcquisition and local storage
Gateway / PLCProtocol and secure uplink
SCADA / CloudDashboard, trends and alarms
Reports / APISQL, CSV, PDF and integration

Engineering approach

Correct interface engineering is as important as sensor selection

A sensor must match the required range, accuracy, response, environment and maintenance plan. Its electrical output must also be compatible with the logger, PLC or RTU.

We engineer scaling, isolation, pulse handling, Modbus mapping, cable and surge-protection arrangements, quality flags and diagnostic displays so the sensor becomes a reliable part of the complete monitoring system.

4–20 mA inputs
0–10 V inputs
Pulse counters
RS485/Modbus
SDI-type integration
Signal isolation
Sensor scaling
Range validation
Quality flags
Cable engineering
Surge protection
Calibration-record fields

Applications

Designed around real operating requirements

Hardware, communication, software and reports are tailored to the site and data users.

Automatic Weather Stations

Complete meteorological sensor packages.

Solar Power Plants

Irradiance, module and ambient measurements.

Industrial Plants

Weather and environmental sensor integration.

Agriculture

Rain, soil and atmospheric monitoring.

Research Institutes

Flexible instruments with open data access.

Remote Monitoring

Low-power sensors connected to telemetry loggers.

Frequently asked questions

Weather Sensors FAQ

Which output is best: analog or Modbus?

The choice depends on cable distance, diagnostics, accuracy, existing I/O and project standard.

Can third-party sensors be integrated?

Yes, after checking the datasheet, output, power and protocol details.

Do sensors require surge protection?

Outdoor instruments commonly benefit from appropriate earthing and surge-protection engineering.

Can one compact sensor measure several parameters?

Yes. Integrated sensors can measure multiple weather parameters where application requirements permit.

How are sensor faults detected?

Range checks, quality registers, communication watchdogs and stale-data logic can be configured.

Discuss your weather sensors requirement

Share the parameter list, site conditions, communication preference and reporting requirement. Swarup Softech will prepare a suitable technical architecture and commercial proposal.

WhatsApp Request Quote WhatsApp